HJDP Front Axle Wheel Hub Unit 513256 with ABS Sensor 5 Bolts for Hyundai Veracruz Sonata Kia KX5 – Wheel Hub Bearing Assembly
SKU: HQ0402
Precise OE Fitment: Specifically engineered for Hyundai 2013 All-New Santa Fe, Veracruz, Sonata 9th Gen and Kia KX5, KX7, Imported Carnival. Replaces OE numbers 51750-2B000, 513256, FW9256, BR930647 ensuring a perfect match for front wheel positions.
Premium Material Construction: Crafted from GCr15 High Carbon Chromium Bearing Steel with vacuum quenching and precision grinding. Features a surface hardness of 62HRC and core toughness of 38HRC for exceptional durability and impact resistance.
Integrated ABS Performance: Comes pre-installed with a high-precision ABS wheel speed sensor and weather-resistant wire harness. Ensures accurate signal transmission to the vehicle’s ESP/ABS system for reliable braking safety.
Ready-to-Install Assembly: This all-in-one unit integrates the bearing core, mounting flange, and 5 pre-pressed M12x1.5 wheel studs. Designed for direct bolt-on installation without the need for modifications or extra calibration.
Sealed for Longevity: Equipped with high-quality nitrile rubber multi-lip seals and an oil-resistant coating to prevent dust and moisture intrusion. Pre-lubricated to reduce vibration and noise for a smooth, quiet ride.
Description
HJDP Wheel Hub Bearing Assembly with ABS for Hyundai Santa Fe (DM/TM)/Palisade (LX2) & Kia Carnival (KA4)
I. Product Overview & Core Highlights
HJDP OE-Level Wheel Hub Bearing Assembly is a high-quality direct replacement part, specifically engineered for Hyundai 2013 All-New Santa Fe, Hyundai Veracruz, Hyundai Sonata 9th Generation, Kia KX5, Kia KX7 and Imported Kia Carnival. Adopting a high-precision integrated structural design, it integrates the hub bearing core, high-strength mounting flange and ABS wheel speed sensor into one ready-to-install unit. This design ensures perfect fitment, stable performance and reliable safety for mid-size SUVs, sedans and MPVs, making it suitable for daily city driving, family long-distance travel and light off-road use.
Brand: HJDP
II. Compatibility & OE Reference Numbers
This HJDP wheel hub bearing assembly is fully compatible with specified Hyundai and Kia models, perfectly replacing the original OE numbers. It ensures 100% in-situ installation without any modification or calibration, saving time for repair technicians and DIY enthusiasts.
OE Interchange Numbers
51750-2B000, 51750-2B010, 513256, FW9256, BR930647
Applicable Models
Hyundai:
-
Hyundai 2013 All-New Santa Fe
-
Hyundai Veracruz
-
Hyundai Sonata 9th Generation
Kia:
-
Kia KX5
-
Kia KX7
-
Imported Kia Carnival
Mounting Position: Front Wheel (Universal Design for Multiple Models, Fit according to OE number)
III. Overall Structural Design
Adopts a High-Precision Integrated Structure, integrating the hub bearing core, high-strength mounting flange and ABS wheel speed sensor assembly (including black wear-resistant insulated wire harness + gray high-temperature resistant engineering plastic connector) into a ready-to-install unit. The compact and solid structure ensures easy assembly, excellent load-bearing capacity (adapting to the characteristics of mid-size SUVs, sedans and MPVs), and can simultaneously meet the core needs of vehicle power transmission, wheel support and ABS system signal transmission. It perfectly matches the chassis design of Hyundai and Kia models, ensuring consistent performance with the original vehicle parts.
IV. Material & Process Details
|
Component
|
Material Selection
|
Process Treatment
|
Core Advantages
|
|
Bearing Body
|
High Carbon Chromium Bearing Steel (GCr15/SAE 52100)
|
Vacuum Quenching + Precision Grinding + Reinforced Anti-Rust Coating
|
Surface hardness up to 62HRC, core toughness 38HRC, balancing excellent wear resistance and strong impact resistance, ensuring stable operation in various driving environments.
|
|
Mounting Flange
|
High-Strength Alloy Steel
|
Satin Finish + Precision Drilling + Stress Relief Treatment
|
Smooth and scratch-resistant surface, precise hole positions matching the original vehicle steering knuckle, strong load-bearing capacity, resistant to deformation under long-term use.
|
|
ABS Sensor Assembly
|
Black Weather-Resistant Rubber (Wire Harness) + Gray High-Strength Engineering Plastic (Connector)
|
Insulation Sealing + Snap-On Fixing + Anti-Tear Treatment
|
Resistant to high and low temperatures (-40℃~120℃), aging and wear; ensures accurate wheel speed signal transmission, fully compatible with the original vehicle ABS/ESP system.
|
|
Sealing Assembly
|
High-Quality Nitrile Rubber + SPCC Steel Framework
|
Multi-Lip Sealing + Oil-Resistant Coating + Dust-Proof Design
|
Effectively isolates dust, moisture and road debris, prevents lubricating grease leakage, and extends the service life of the bearing.
|
V. Key Detail Features
-
Wheel Mounting Surface: The HJDP brand logo and product code are clearly laser-engraved on the surface, easy to identify. 5 silver-gray high-strength wheel bolts (specification M12×1.5) are evenly distributed in a ring, ensuring stable fixation of the wheel even under driving vibration. The gray ABS sensor connector is led out from the side, with a standard interface that perfectly matches the original vehicle wiring harness.
-
ABS Sensor Detail: Equipped with high-precision induction ring, perfectly matching the ABS system of Hyundai and Kia models, ensuring accurate and stable wheel speed signal transmission, enhancing braking safety in various road conditions.
-
Side View Features: 4 threaded steering knuckle mounting holes are distributed on the edge of the flange with precise positions, ensuring firm connection with the vehicle chassis. The ABS wire harness is fixed on the flange surface through a special anti-shake snap-on buckle, avoiding shaking and wear.
-
Bearing End Face Details: The center is a precision internal spline shaft hole, specially designed to fit with the vehicle half-shaft, ensuring stable power transmission without jitter or abnormal noise during high-speed driving. The bearing outer ring matches the original vehicle steering knuckle, ensuring no gap after assembly.
-
Marking Information: The OE numbers and product model are engraved on the flange surface, facilitating quick identification of applicable models and specifications for repair technicians and customers.
VI. Core Technical Specifications
|
Specification Category
|
Specification Details
|
|
Net Weight
|
3.8KG (solid material selection, ensuring stable load-bearing performance for SUVs, sedans and MPVs)
|
|
Overall Dimensions
|
145×140×140mm (Length × Width × Height)
|
|
Bearing Type
|
Integrated Wheel Hub Bearing (with ABS Sensor)
|
|
Wheel Bolt Specification
|
M12×1.5 (5 pieces)
|
|
Flange Diameter
|
155mm
|
|
Mounting Hole Pitch
|
114.3mm
|
|
Core Functions
|
Power Transmission + Wheel Support + ABS Wheel Speed Signal Collection
|
VII. Core Product Advantages
-
Multi-Model Compatibility: 100% OE standard design, compatible with Hyundai 2013 All-New Santa Fe, Veracruz, Sonata 9, Kia KX5/KX7 and Imported Carnival, direct replacement without modification.
-
Stable Load-Bearing: 3.8KG solid structure, optimized for mid-size SUVs, sedans and MPVs, meeting daily driving and family travel needs with strong load-bearing capacity.
-
Reliable ABS Performance: High-precision ABS sensor ensures stable signal transmission to ESP/ABS system, enhancing braking safety in various road conditions.
-
Durable & Long-Lasting: GCr15 bearing steel with vacuum quenching and multi-lip sealing design, extending service life and reducing maintenance frequency.
-
Ultra-Quiet Operation: Precision ground bearing surface and high-quality lubricating grease, reducing driving noise and vibration for better comfort.
-
Cost-Effective & Easy Installation: Ready-to-install integrated design, saving installation time; OE-level quality with competitive price, ideal for repair shops and DIY enthusiasts.
VIII. HJDP Professional Installation Tips
1. Before installation, confirm that the OE number and vehicle model match to avoid installation errors. 2. Keep the flange and steering knuckle mounting surfaces clean and free of debris to ensure a tight fit. 3. Tighten the bolts according to the original factory torque standard (recommended 75-85 N·m) to ensure firm installation. 4. Check the ABS sensor connection after installation and test the ABS function before formal use. 5. Regularly inspect the bearing for abnormal noise or vibration, and maintain or replace it in time if necessary.
IX. About HJDP
HJDP is a professional manufacturer of automotive chassis and transmission components, focusing on OE-level replacement parts for Hyundai, Kia and other mainstream automotive brands. All products are produced in strict compliance with IATF16949 quality management system, undergoing strict quality inspection before leaving the factory, ensuring high quality, stability and reliability. We are committed to providing cost-effective auto parts for global customers, meeting various driving scenario needs.
Contact US
Related Products
Related products
Customer Reviews
★★★★★ Rated 5 out of 5
“These wheel hub bearings are extremely well-made and fit perfectly on my vehicle. The installation was smooth, and they’ve been running quietly and reliably for weeks. Great quality for the price—definitely will buy again and recommend to anyone looking for durable wheel bearings!”
★★★★★ Rated 5 out of 5
“I’m very impressed with the performance of these wheel hub bearings. They feel solid, reduce vibration significantly, and have greatly improved my driving experience. Fast shipping, excellent build quality, and professional fitment. 10/10, will purchase for future projects!”