HJDP Wheel Hub Bearing Assembly with ABS for Toyota Camry/Venza/Avalon & Lexus ES200 2018-
SKU: HQ0285
PRECISE FITMENT & COMPATIBILITY: Engineered as a direct OE replacement for Toyota Camry 2018 (Gasoline 26 Teeth), Venza, Avalon, and Lexus ES200 (2018-Present). Replaces OE numbers 43550-06040, 43550-33010, and 4355033030 with zero modification required.
INTEGRATED 26-TOOTH ABS SENSOR: Features a pre-installed, high-precision 26-tooth ABS induction ring and weather-resistant connector. Ensures accurate wheel speed signal transmission to the vehicle’s ESP/ABS system for enhanced braking safety and stability.
PREMIUM GCr15 STEEL CONSTRUCTION: Manufactured from High Carbon Chromium Bearing Steel (GCr15/SAE 52100) with vacuum quenching. Achieves surface hardness of 62HRC for superior wear resistance, impact durability, and extended service life.
ULTRA-QUIET & SEALED DESIGN: Equipped with high-quality nitrile rubber multi-lip seals and premium synthetic grease. Effectively isolates dust, moisture, and road debris while preventing leakage, ensuring a smooth, noise-free, and vibration-free driving experience.
READY-TO-INSTALL ASSEMBLY: Complete unit includes the hub bearing core, high-strength mounting flange, and 5 pre-pressed M12x1.5 wheel bolts. Precision-drilled mounting holes allow for quick, hassle-free installation by mechanics or DIY enthusiasts.
Description
HJDP Wheel Hub Bearing Assembly with ABS for Toyota Camry/Venza/Avalon & Lexus ES200 2018-
I. Product Overview & Core Highlights
HJDP OE-Level Wheel Hub Bearing Assembly is a direct replacement part, specifically designed for Toyota Camry 2018 Gasoline (26 Teeth), Toyota Venza, Toyota Avalon and Lexus ES200 2018-. Adopting integrated structural design with 26-tooth ABS sensor, it integrates hub bearing core, mounting flange and ABS wheel speed sensor into one ready-to-install unit, ensuring perfect fitment, ultra-quiet performance and reliable safety for mid-to-high-end sedans and SUVs, suitable for daily city driving.
Brand: HJDP
Reference Price: 100 RMB (cost-effective OE-quality replacement for Toyota & Lexus)
II. Compatibility & OE Reference Numbers
This HJDP wheel hub bearing assembly is fully compatible with Toyota and Lexus models, perfectly replacing the following OE numbers, ensuring 100% in-situ installation without modification or calibration:
OE Interchange Numbers
43550-06040, 43550-33010, 4355033030
Applicable Models
GAC Toyota:
-
Toyota Camry 2018 Model (Gasoline Version, 26 Teeth)
-
Toyota Venza
-
Toyota Avalon
Lexus (Imported):
-
Lexus ES200 2018- Present
Mounting Position: Front Wheel (26-Teeth ABS Sensor, Fit according to OE number)
III. Overall Structural Design
Adopts High-Precision Integrated Structure, integrating hub bearing core, high-strength mounting flange and 26-tooth ABS wheel speed sensor assembly (including black insulated wire harness + gray high-temperature resistant plastic connector) into a ready-to-install unit. The compact and lightweight structure ensures easy assembly, stable load-bearing capacity, and can simultaneously meet the core needs of vehicle power transmission, wheel support and ABS system signal transmission, perfectly matching the chassis design of Toyota and Lexus mid-to-high-end models.
IV. Material & Process Details
|
Component
|
Material Selection
|
Process Treatment
|
Core Advantages
|
|
Bearing Body
|
High Carbon Chromium Bearing Steel (GCr15/SAE 52100)
|
Vacuum Quenching + Precision Grinding + Anti-Rust Coating
|
Surface hardness up to 62HRC, core toughness 38HRC, balancing wear resistance and impact resistance, ensuring ultra-quiet operation
|
|
Mounting Flange
|
High-Strength Alloy Steel
|
Satin Finish + Precision Drilling
|
Smooth and scratch-resistant surface, precise hole positions, high fit with vehicle steering knuckle, ensuring stable installation
|
|
ABS Sensor Assembly (26 Teeth)
|
Black Weather-Resistant Rubber (Wire Harness) + Gray High-Strength Engineering Plastic (Connector)
|
Insulation Sealing + Snap-On Fixing
|
Resistant to high and low temperatures (-40℃~120℃) and aging; 26-tooth design ensures accurate wheel speed signal transmission, compatible with original vehicle ABS/ESP system
|
|
Sealing Assembly
|
High-Quality Nitrile Rubber + SPCC Steel Framework
|
Multi-Lip Sealing + Oil-Resistant Coating
|
Effectively isolates dust, moisture and road debris, prevents lubricating grease leakage, and extends bearing service life in daily driving
|
V. Key Detail Features
-
Wheel Mounting Surface: The HJDP brand logo and product code are clearly laser-engraved on the surface. 5 silver-gray high-strength wheel bolts (specification M12×1.5) are evenly distributed in a ring, ensuring stable fixation of the wheel. The gray ABS sensor connector is led out from the side, with a standard interface, facilitating quick and firm connection with the original vehicle wiring harness.
-
ABS Sensor Detail: Equipped with 26-tooth high-precision induction ring, perfectly matching the 2018+ Toyota Camry gasoline version and Lexus ES200 ABS system, ensuring accurate and stable wheel speed signal transmission, effectively preventing wheel lock during braking.
-
Side View Features: 4 threaded steering knuckle mounting holes are distributed on the edge of the flange with precise positions (no deviation), ensuring firm connection with the vehicle chassis. The ABS wire harness is fixed on the flange surface through a special snap-on buckle, avoiding shaking and wear during driving.
-
Bearing End Face Details: The center is a precision smooth shaft hole, used to fit with the vehicle half-shaft, ensuring stable power transmission without jitter or abnormal noise. The bearing outer ring is designed to match the original vehicle steering knuckle, ensuring no gap after assembly.
-
Marking Information: The OE number (e.g., 43550-06040) and product model are engraved on the flange surface, facilitating quick identification of applicable models and specifications for repair technicians and customers.
VI. Core Technical Specifications
|
Specification Category
|
Specification Details
|
|
Net Weight
|
3.9KG (solid material selection, ensuring stable load-bearing performance)
|
|
Overall Dimensions
|
163×154×143mm (Length × Width × Height)
|
|
Bearing Type
|
Integrated Wheel Hub Bearing (with 26-Teeth ABS Sensor)
|
|
Wheel Bolt Specification
|
M12×1.5 (5 pieces)
|
|
Flange Diameter
|
155mm
|
|
Mounting Hole Pitch
|
114.3mm
|
|
ABS Sensor Teeth
|
26 Teeth
|
|
Core Functions
|
Power Transmission + Wheel Support + 26-Teeth ABS Wheel Speed Signal Collection
|
VII. Core Product Advantages
-
Perfect Fitment for Toyota & Lexus: 100% OE standard design, specifically compatible with Toyota Camry 2018 Gasoline (26 Teeth), Venza, Avalon and Lexus ES200 2018-, direct replacement without modification.
-
26-Teeth ABS Sensor: High-precision induction ring, perfectly matching the original vehicle ABS/ESP system, ensuring accurate and stable signal transmission, enhancing braking safety.
-
Ultra-Quiet Performance: Precision ground bearing surface and high-quality synthetic lubricating grease, effectively reducing driving noise and vibration, improving driving comfort.
-
Premium Durability: GCr15/SAE 52100 bearing steel with vacuum quenching, anti-rust coating, and multi-lip sealing design, extending service life in daily driving environments.
-
Easy Installation: Ready-to-install integrated design, no additional assembly required, saving installation time and labor costs for repair shops and DIY enthusiasts.
-
Cost-Effective: OE-level quality with competitive price, providing a reliable and affordable replacement option for Toyota and Lexus owners.
VIII. HJDP Professional Installation Tips
1. Before installation, confirm that the OE number and vehicle model match (especially for Toyota Camry 2018 gasoline version with 26 teeth) to avoid installation errors. 2. Keep the flange and steering knuckle mounting surfaces clean and free of debris to ensure a tight fit and stable operation. 3. Tighten the bolts according to the original factory torque standard (recommended 75-85 N·m) to ensure firm installation and avoid loosening during driving. 4. Check the ABS sensor connection after installation to ensure normal signal transmission; test the ABS function before formal use. 5. Regularly inspect the bearing for abnormal noise or vibration during use, and maintain or replace it in time if necessary.
IX. About HJDP
HJDP is a professional manufacturer of automotive chassis and transmission components, focusing on OE-level replacement parts for Toyota, Lexus and other mainstream automotive brands. All products are produced in strict compliance with IATF16949 quality management system, undergoing strict quality inspection before leaving the factory, ensuring high quality, stability and reliability. We are committed to providing cost-effective auto parts for global customers, with a focus on mid-to-high-end passenger car accessories.
Contact US
Related Products
Related products
Customer Reviews
★★★★★ Rated 5 out of 5
“These wheel hub bearings are extremely well-made and fit perfectly on my vehicle. The installation was smooth, and they’ve been running quietly and reliably for weeks. Great quality for the price—definitely will buy again and recommend to anyone looking for durable wheel bearings!”
★★★★★ Rated 5 out of 5
“I’m very impressed with the performance of these wheel hub bearings. They feel solid, reduce vibration significantly, and have greatly improved my driving experience. Fast shipping, excellent build quality, and professional fitment. 10/10, will purchase for future projects!”